Search Results For: HIKvision Error

Hikvision no enough bandwidth

Hikvision “No Enough Network Bandwidth” Error

Once in a while, when trying to add an IP camera to Hikvision NVR via ONVIF, a Hikvision “No Enough Network Bandwidth” Error Message can appear. This issue can be seen in Hikvision brand recorders and OEM brands like Luma, LTS, Annke, Ezviz, Cantek, among other brands. The error messages reveal that the NVR is unable to […]

Continue Reading
Hikvision NVR Resolution Parameters

Hikvision No Resource Error (solved)

The message “No resource” is displayed in the Hikvision DVR or NVR to indicate a configuration problem. In this article, I explain how to fix this issue.The picture above shows all the channels with the same problems, but sometimes you can have some of the cameras working and others that show the “No Resource’ message. […]

Continue Reading
Hik-connect status offline solved

Hikvision Offline (0Xe0000105) error (solved)

Let’s see how to solve the Hikvision error Offline (Xe0000105) problem.The (Xe0000105) error shows up when the P2P platform (Hik-connect) is being used and you can quickly fix it by adjusting your network parameters.You may also see this error as Offline (0Xe0000104) or Offline (0Xe0000108).Let’s take a look at how to solve these connection issues.What causes […]

Continue Reading
Hikvision data transmission error solved

Hikvision Data Transmission Error (Solved)

In this article, I explain how to fix the Hikvision Data Transmission Error.You probably experienced this error if you are using a Hikvision app, such as the Hik-connect or iVMS-4500, to view your camera and recorders remotely.Let’s take a look at more details…What causes the Data Transmission ErrorThe “Data Transmission Error” is related to a […]

Continue Reading
SADP Tool Error 2015

Hikvision SADP error 2015 (solved)

This article will help you to solve the problem with the Hikvision SADP error 2015.If you have a Hikvision camera or recorder (DVR or NVR), you may face this type of error while trying to configure the IP address. So let’s talk about a solution for that.The message “Error 2015: Others” is displayed when the […]

Continue Reading
Hikvision nomore cameras allowed message

Hikvision – No more IP camera allowed error (solved)

If your Hikvision NVR shows the message “No more IP camera allowed” probably is because the IP cameras are connected to a PoE switch and not directly to the unit. If that’s your case, keep reading to see the solution to the problem.If the NVR mistakenly identifies that more devices are connected to is, a […]

Continue Reading
Open HDD

Hikvision HDD error (How to fix)

If you got the Hikvision HDD error on your DVR or NVR this article is for you.Sometimes the HDD is not detected or enters into an abnormal operational state and you need to fix this problem as soon as possible to avoid lost footage recording. This happens with Hikvision or any other recorder.What causes the […]

Continue Reading
Hikvision iVMS-4200 error code 302

Hikvision iVMS-4200 Error 302 (Quick Fix)

Did you see the error code 302 on your Hikvision iVMS-4200 software?Alright, you arrived at the right place. In this article, I talk about this problem…There’s a quick fix for this problem, so don’t worry too much about it.What is this error about?Incompatibility or glitch in the firmware version your device is using.That’s it. Sometimes […]

Continue Reading
Hikvision iVMS error code 7

Hikvision Login Failed error code 7 (Solved)

The Hikvision login failed error code 7 is an error that shows the message:Error code 7.(Connection failed: device off-line or connection timeout.)Sometimes you can also see the reference HCNetSDK.dll[7] to indicate the problem your software (iVMS-4200) or other device is facing.Usually, it’s very easy to fix the problem as long as you understand some basic principles […]

Continue Reading
iVMS 4200 Error Code 23

Hikvision iVMS-4200 error code 23 HCNetSDK.dll(23)

If you are using the Hikvision iVMS-4200, sometimes you can face error code 23:”Failed to search the event triggered video. Error Code HCNetSDK.dll[23].(Not supported.)”This error is related to the smart playback, so let’s talk about it…What causes the error code 23?The iVMS-4200 acts like a recorder, that’s the reason for the name PC-NVR.So, the software […]

Continue Reading