WWW.CCTVCAMERAPROS.COM for more info … Welcome to the series of instructions from the video surveillance system for the pros of the CCTV camera. This video will demonstrate how to use a deck to test weather the security cameras in preparation for the IP security camera for outdoor use. The security cameras are used following the IP for this demonstration. Although we are using this particular camera, all the security cameras in the style of the box that the sources of the pros of the CCTV camera can use this same type of cover on the camera. Start by opening the closure on the back of the cover. This closure can be secured with a pad lock if desired. When the cover of the cover is opened, notice the plate of the camera is on the inside. This is the piece that aggregates security cameras actually a. This plate can be positioned by sliding the plate in the track under the cover of the camera. Remove the cover plate to tie the security cameras to them. Aggregates on security cameras at the plate with some screws. After the camera is tethered to the deck, behind the plate mounts easily inside the cover by pressing in place. Once that is behind the plate inside the cover, you can slide the plate toward the appropriate location of the window of the camera lens covers. When you do that sets the plate, closing the lid of the casing of the camera and says the closure. The cover of the camera is typically attached to a support outdoor deck of the camera. Dure, power and video cables can be run through the eye with rubber weather-proof surface on the lower deck. Thank you for watching this video on the roofs of the security cameras. If you have any questions, please visit us online at www.cctvcamerapros.com or call 888-849-2288.